Testo Saveris Kits

Data Monitoring for Temperature and Humidity Automated with the Testo Saveris

The Testo Saveris is an easy to install radio and Ethernet data monitoring system where temperature and humidity need to be measured on a continuous basis.

The testo Saveris radio probes measure temperature and humidity, and during the measuring cycle, the probes save recorded data and send it to the base unit at preset intervals. If a limit value is exceeded, a radio link is established immediately, and through bidirectional transmission, the radio probe and the base are in mutual contact. This ensures that the measurement data is only recorded by the base and is not compromised by other radio signals.

In free space, the transmission path is approximately 984 feet at a frequency of 868 MHz and approximately 328 feet at a frequency of 2.4 GHz. Inside buildings, the transmission path is influenced by structural conditions such as walls, refrigerator doors or metal doors, but the radio link can be improved or lengthened by using a router. Because the radio probe and the router show the quality of their radio link, the probe can be positioned by the user for maximum signal quality.

A variety of probes with internal and external sensors allow adaptation for every application, and the radio probes are available with or without a display. Current measurement data, the battery status, and the quality of the radio link are conveniently shown on the display.

The probes can be directly connected to the Ethernet using an existing LAN infrastructure, which allows the data transfer from the probe to the base, even over long distances.