> AEMC 6470 2135.02 Multi-Function Ground Resistance Tester Kit 150 Ft
AEMC 6470 2135.02 Multi-Function Ground Resistance Tester Kit 150 Ft
DISCONTINUED

AEMC 6470 2135.02 Multi-Function Ground Resistance Tester Kit 150 Ft

Your Price: $2,588.49
Not for Sale
Part Number:4183

AEMC 6470 2135.02 Multi-Function Ground Resistance Tester Kit 150 Ft.

The AEMC 6470 Multi-Function Ground Resistance Tester performs earth coupling measurements, grounding resistance, bonding tests, and soil resistivity.

 

The 6470 tester measures from 0.01 to 99,000 Ohms, and is auto ranging, automatically finding the best measurement range, test current and frequency. Simply connect the test leads, make your test mode selection, Press to Measure and read the results. Up to a maximum of 512 individual test results can be stored in memory for later review to the display or download to your PC for hard copy reports and analysis.

 

6470 Features

  • 4 Pole (4 Point) Fall of Potential measurement for extremely low resistance measurements with automatic or manual frequency selection and automatic lead compensation
  • 3 Point Fall of Potential measurement
  • 3 Point earth coupling measurement
  • Manual or automatic frequency scan from 40 to 513 Hertz for test accuracy in electrically noisy environments
  • Earth coupling testing
  • Selectable test voltage 16 or 32 Volts up to 250 milliAmp test current
  • 4 Point soil resistivity measurement with automatic calculation of Rho and user selection of Schlumberger or Wenner test method
  • 2 and 4 Wire DC resistance measurement (Bond testing) with automatic polarity reversal
  • Auto off power management
  • Automatic recognition of all electrode connections and their resistance value
  • Stores a maximum of 512 complete test results in memory
  • Optically isolated USB communication
  • Remote set up and operation of all measurements using the included DataView software
  • Rechargeable NiMH batteries from AC charger or vehicle charger
  • Rugged rainproof and dustproof field
  • Includes DataView software
 
6470 150 Foot Tester Kit Includes
  • 2 - 150 foot red and blue color coded leads on spools
  • 1 - Green 30 foot lead
  •  2 - 14 1/2 inch T-shaped auxiliary ground electrodes
  •  set of 5 spaded lugs
  •  100 foot long tape measure
  •  Soft carry bag

 

Applications

  • 3 Point measurements of resistance to ground of grids and ground rods. 3 Point measurements are used when electrode or grid can be easily disconnected.
  • 4 Point tests or soil resistivity measurements. Locating areas of lowest soil resistivity is essential for achieving a feasible grounding installation.
  • Touch and step potential testing measurements. These tests are best where ground faults are highly likely to occur, when the ground cannot be disconnected, or when the “footprint” of grounded equipment (the outline of the part of equipment in contact with earth) is comparable to the size of the ground to be tested.
  • 2 or 4 Wire tests for continuity tests on bonding or on grounding systems. Test is a DC resistive test using 250 mA or more and is used to check bonding of all connection points on the ground system.
  • Earth coupling measurement and display. Used to estimate the influence of two earth resistance systems that are not connected to each other.

 

 


Specifications
Electrical
3-Point Measurement
Range (Auto-Ranging) 0.01 to 99.99k Ohms
Resolution 0.01 to 100 Ohms
Test Voltage Nominal 16 or 32 Volts RMS user selectable
Resistance
Measurement Frequency 41 to 513 Hertz user selectable or automatic selection
Test Current Up to 250 mA
Accuracy ±2 percent of Reading + 1ct
Earth Coupling Measurement Yes
Soil Resistivity 4-Point Measurement
Test Method
Wenner or Schlumberger selectable with automatic calculation
of test results in Ohm-meters, Ohm-cm or Ohm-feet
Range (Auto-Ranging) 0.01 to 99.99k Ohms
Resolution 0.01 to 100 Ohms
Test Voltage 16 or 32 Volts user selectable
Frequency From 41 to 128 Hertz selectable
External Voltage Measurement
Range (Auto-Ranging) 0.1 to 65.0 Volts — DC to 450 Hertz
Accuracy 2 percent of Reading + 3cts
Resistance Measurement (Bond Testing)
Measurement Type 2-Point (with lead resistance compensation) or 4-Point (Kelvin sensing) user selectable
Range (Auto-Ranging) 2-Point 0.01 to 99.9k Ohms; 4-Point 0.001 to 99.99k Ohms
Accuracy ±2 percent of Reading + 2cts
Test Voltage 16 Volts dc (+, — or auto polarity)
Test Current Up to 250 mA maximum
Data Storage
Memory Capacity 512 test results
Communication Optically isolated USB
Automatic Report Generation Yes — tabular listings and Fall-of-Potential plots
Power Source 9.6 Volt rechargeable battery pack
Recharging Source
110/220 50/60 Hertz external charger with 18 Voltsdc,
1.9 Amp output or 12 Volt dc vehicle power
Mechanical
Test Lead Connection 4 millimeter recessed banana jacks
Mechanical Shock Per EN 61557
Vibration Test Per EN 61557
Drop Test Per EN 61557
Dielectric Test 3 kV 50/60 Hertz
Dimensions
10.7 x 9.76 x 5.12 inches
272 x 248 x 130 millimeters
Weight 7.5 pounds - 3.5 kg
Case Polypropylene
Index of Protection IP53 with cover closed
Display