AEMC CA7026 2127.81 Fault Mapper Pro Telephone Coax Graphical Cable Tester

The AEMC CA7026 Fault Mapper Pro Cable Tester is a graphical hand held TDR (Time Domain Reflectometer) engineered to identify and locate faults on communication and power cables, with access to only one end.

The CA7026 measures cable length, and displays the distance to cable faults and terminations to a maximum range of 11,700 feet – 3500 meters, on almost any type of cable of 2+ conductors. The CA7026 shows a reflection profile of the cable being tested as an oscilloscope like waveform on a 128 x 64 pixel graphical LCD. A movable cursor can be aligned with points on the trace, and the distances displayed will automatically update the cursor position.

Range at Vp = 70 percent	11,700 feet - 3900 meters
Ranges at Vp = 70 percent	670, 1470, 2900, 5830, and 11,700 feet 220, 440, 870, 1750, and 3900 meters
Resolution	Approximately 1 percent of selected range
Accuracy	±1 percent of Range
Range Selection	Automatic range selection against cursor position
Minimum Cable Length	12 feet - 4 meters
Sensitivity	Minimum 3 pixel return on a fault at 6000 feet - 2 kilometers
Vp (Velocity of Propagation)	Adjustable from 0 to 99 percent in 1 percent steps
Output Pulse	5 Volts into an open circuit or +1.5 Volts into 50 ohm load 25 ns minimum to 2.15 μs dependent on range
Cable Impedance	Selectable between 50, 75, and 100 Ohms
Display Resolution	128 x 64 pixel graphical LCD
Tone Generator	Oscillating 810 Hertz to 1110 Hertz
Scan Rate	Single shot or 6.7 pulses per second (operator selectable)
Power Source	4 ea 1.5 Volt AA Alkaline Batteries
Auto-Off	After 3 minutes
Weight	12 ounces - 350 grams