Miller X11013 ShockFusion Base Plate Fall Protection

Miller X11013 X 11013 ShockFusion Base Plate Fall Protection

Your Price: $195.00

Part Number: 6814

Quantity

The X11013 ShockFusion Base Plate is a small base for connecting Fusion and ShockFusion Roof Posts to Trapezoidal, Wood, Concrete, and Metal Sheathing Roofs.

X11013 Connection Options

Connection of Fusion Intermediate Post (X11008) or ShockFusion End/Corner Post (X11009) to metal sheathing with a min. thickness of 24 gauge (0.024 inches [0.61 millimeters]) or Trapezoidal spacing of 8 inches (203 millimeters) to 20 inches (508 millimeters) in one-inch (25.4 millimeters) increments when paired with Rivet Kit (X11003).
Connection of Fusion Intermediate Post (X11008) or ShockFusion End/Corner Post (X11009) to plywood with minimum thickness of 5/8-in. (15.9 mm) CDX when paired with Lag Screw Kit (X11006).
Connection of Fusion Intermediate Post (X11008) or ShockFusion End/Corner Post (X11009) to concrete decking with minimum thickness of 6.5 in. (165 mm) & minimum concrete compressive strength of 3000 PSI (20.7 MPa) when paired with Concrete Anchor Kit (X11007).

X11013 ShockFusion Base Plate Specifications
Material	Powder Coated, Zinc Plated
Technical
Ultimate Strength Rating	5,000 pounds (22.2kN)
Certifications	Meets OSHA 1910.66, 1926.502, EN795 Class C and ANSI A10.32
System components meet design specifications required in CSAZ259.16-2004 and ANSI Z359.6.Please note that the installed ShockFusion system must be determined to be in complianceby an experienced and qualified engineer.

$285.32

$123.63

$165.00

$148.71

$305.00

$368.75

$424.53

$449.00

$339.52