The FRGrip Plus 5 glove inherently flame-retardant and heat-resistant fibers that will not degrade or melt when exposed to high-heat levels. FRGRip provides protection up to a specified heat/energy level (5.6 Cal/Cm2) without breaking down and/or melting; thermal heat can still be felt through the glove.
Key Features: 13 Gauge, Kevlar blend, seamless knit shellNeoprene and nitrile, bi-polymer dipped coating provides excellent heat resistance as well as resistance to oil and greaseTextured palm for better grip in wet or dry applicationsKevlar fiber blend also offers excellent cut protectionHRC level 1 (ATPV = 5.6 Cal/Cm2)ANSI cut level 4 / EN388 cut level 5Static dissipative, with a surface resistivity of, 2.5 x 109Longer 4 inch cuff to allow glove to be tucked under FR clothingRecommended Industries/Use: ConstructionManufacturingMunicipal ServicesSteel and MetalsUtilitiesHazards: Cut / PunctureFireRegulations: ASTM F2675/F2675M-13 - Standard test method for determining arc ratings of hand protective products developed and used for electrical arc flash protectionCAN/CGSB-155.20-2000 - Workwear for protection against hydrocarbon flash fireANSI/ISEA 105 - ASTM D3389-05 Abrasion TestANSI/ISEA 105 - ASTM F1790-97 Cut TestEN388 - Mechanical risks from abrasion, cut, tear and punctureEN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.Warranty Information: LIMITED WARRANTY. Except for any warranty for a particular product or part specifically stated in our product literature, we warrant all goods sold under this agreement against defects in materials and workmanship for one year from shipment. In the event of such defects, we will, at our sole option and as your exclusive remedy, repair or replace the defective product without charge, or refund the price you have paid. In order for this warranty to be effective, you must notify us within 15 days of discovery of the defect. you must return the defective product to us within the warranty period, properly packaged and with insurance and transportation costs prepaid. We will reship the product to you at our expense in the United States. Products will conform to Honeywell published specifications if properly used and maintained and will be free from defects in materials and/or workmanship. no changes to Honeywell published specifications will be valid without Honeywell written consent. This warranty does not cover defects which we determine are because of accident, alteration, modification, negligence, misuse, abuse failure to perform adequate maintenance, or normal wear and tear.
ANSI Cut Level: 4EN388 Cut Level: 5ASTM F2675/F2675M-13: PassedCAN/CGSB-155.20-2000: Pass, no melting or drippingAmbidextrous or Hand Specific: Hand specificCoating: Neoprene and Nitrile, bi-polymerCoating Color: BlackCoating Pattern: Palm and finger-tipsConstruction: Seamless knitCuff: KnitGauge / mil: 13 GaugeGlove Type: DippedLength: NALiner: NAMaterial: Kevlar blend of inherently flame retardant fibersMaterial Color: OrangeOveredge: Green (XS), Red (S), Blue (M), Yellow (L), White (XL), Orange (XXL)Supported or Unsupported: NASurface Finish: TexturedPackaging Information: 12 pair per pack, 144 pair per case
