Miller Temporary Anchorage Connectors

Overview

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage. Miller anchorage connectors are easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs. (22 kN) per worker.

Quality

Miller Anchorage Connectors meet all applicable ANSI, OSHA and CSA requirements.

Features & Benefits:

Rebar Hook Anchors:

Designed to facilitate anchoring to scaffolding, pipe or angle iron
310 lbs.(140.6 kg)maximum capacity

Push-Thru Eye Bolt Anchors:

Spring-action anchorage connector offers simple one-hand installation
Fits 3/4-in. (19 mm) diameter holes
Includes the integral SofStop Shock Absorber
310 lbs.(140.6 kg) maximum capacity

Cross-Arm Strap Anchorage Connector:

6-ft. (1.8 m) web Cross-Arm Strap wraps around I-beams and other structures and attaches with a 2-in.(51 mm)D-ring that slips through a 3-in.(76 mm) D-ring to form a secure attachment point for lanyards and other connecting devices
400 lbs. (181.4 kg) maximum capacity?

Extension Pole & Hook Anchor:

The 20-ft. (6 m) fiberglass pole and spring-loaded hook is ideal for use with climbing ladders and towers
Installs fall arrest systems up to 20 ft.(6 m) from ground level to angle iron, piping and related structures
400 lbs. (181.4 kg) maximum capacity

Looped Cross-Arm Anchorage Connector:

6-ft. (1.8 m), 2-in.(51 mm) web strap
2-in. (50 mm) D-ring
400 lbs. (181.4 kg) maximum capacity

Concrete D-Bolt:

Concrete D-Bolt Anchorage Connector includes a 5/8-in. (16 mm) stud-type expansion anchor that is ideal for applications with concrete and lightweight concrete that meet required specifications (min. 2,000 psi [13.8 MPa])
Can be installed on a vertical wall or overhead for versatility
Concrete Expansion Bolt (417CBOLT/) available separately

Cable Anchorage Connector:

Cable Anchorage Connectors create quick and easy secure points of attachment
Constructed of 1/4-in. (6 mm) vinyl-coated, galvanized wire rope and a steel 3-in. (76 mm) O-ring
Standard length is 6-ft.(1.8 m); additional lengths available
8187V features a forged steel, auto-lock, captive eye carabiner with 1-in.(25 mm)gate opening
8186V features a locking snap hook with 3/4-in.(19 mm)gate opening. 400 lbs.(181.4 kg) maximum capacity

Wire Hook Anchor:

Designed to facilitate anchoring to scaffolding, pipe or angle iron
Features a locking rebar hook for easy, one-hand installation and a D-ring on the other end to accommodate the connecting device
400 lbs. (181.4 kg) maximum capacity

Beam Trolley:

Beam Trolley is adjustable and slides along with the worker to provide maximum mobility. Adjusts to fit beam flanges from 3 in (76mm) to 4-1/2 in. (114 mm) wide
Beam Trolley Retrofit Kits convert Beam Trolley 9065/BK to accommodate beam flanges up to 8-1/2 in. (216 mm) wide
9065-1 accommodates I-beams up to 8-1/2-in. (216 mm) wide
9065-2 accommodates I-beams up to 12-in. (305 mm) wide. 400 lbs
(181.4 kg) maximum capacity

Cross-Arm Chain Anchor:

The 6-ft. (1.8 m) Chain Anchor provides a single user with an easy-to-install, temporary anchorage connector that easily wraps around I-beams or other structures
This product safely wraps around corners and sharp edges and is ideal to use in environments where chemical, heat or welding splatter may occur
400 lbs. (181.4 kg) maximum capacity

Beam Clamps:

The Beam Clamp is a steel anchor point that can be attached to horizontal I-beams, S-beams or W-beams
Swivel attachment ring prevents twisting of the worker’s connecting device
400 lbs.(181.4 kg)maximum capacity

Disposable Concrete Anchor Strap:

Designed to provide temporary anchorage on concrete forms
Constructed of 1-3/4-in. (44 mm) wide, abrasion-resistant webbing
Forged steel D-ring (8185C) is capable of withstanding 5,000 lbs. (22 kN)
Standard lengths of 2-ft. (.6 m) and 4-ft. (1.2 m); additional lengths available
Also available with web loop (includes inner-wear pad for carabiner attachment)

Carabiners (400 lbs. [181.4 kg] maximum capacity)